Author: admin

How to Prevent Collapse of Toronto Roofing

No Comments

How to Prevent Collapse of Toronto Roofing

Collapse of Toronto roofing is a serious structural failure that can affect other parts of a house. Since roof frames connect to the walls, there is a good reason to believe that the walls would also be affected if the frames are compromised.

The danger involved in a roof collapse makes it imperative that homeowners fully understand the way roofs work, particularly their load-bearing capacity.roofing company

Load Capacity. A residential roof can normally support up to 20 pounds per square foot of snow unless the roof structure is damaged or weakened. In mountainous and snow-prone areas in Canada the load capacity of roofs is much higher to enable them to withstand greater snow weight. You can check with your local building official to know if your house had higher loads at the time it was constructed.

Risk Evaluation. Snow tends to run off a roof that has a steeped slope, especially those with slopes greater than 3 inches per 12 inches of horizontal distance. In the northern areas, houses are generally built with steeper slopes or roof pitch. Snow accumulates more on low-sloped or flat roofs. Porches generally have low-pitched roofs. Furthermore, expect snow build up on sections of the home that are adjacent to higher parts of the house since snow blown by strong winds from taller places would fall there.

Estimating Snow Weight. Four feet of fresh snow on the roof weighs around 20 pounds. Two feet of packed snow weighs around 20 pounds. For ice, 1 inch of it is equivalent to around 1 foot of fresh snow.

Removing Snow. When the amount of snow that falls on your roof exceeds 20-25 pounds per square foot of roof space, consider the situation as serious or in the danger zone. You should consider removing the snow from the roof. For a safe removal of snow, you can use an extendible snow rake that is widely available at your local supply store to remove snow without going up the roof or leaving the safety of the ground. You can engage the services of a professional Toronto roofing company to remove the snow too.

Preventing Snow. Aside from using a snow rake, other alternatives for preventing or removing snow and ice on the roof are available such as heat cables installed on the roof and calcium chloride placed inside nylon stockings and positioned strategically on the problem areas on the roof. Roof tablets may be used as well, which are simply thrown into the roof.

5 Mistakes You Must Avoid When Choosing An Toronto Roofing Contractor

No Comments

5 Mistakes You Must Avoid When Choosing An Toronto Roofing Contractor

The roof is acrucial component when it comes to determining the value and strength of a house. Whenever you need minor repairs or overall fixtures done on your housetop, ensure that you do not fall into traps that might open a black hole in your expense budget. Are you looking for an Toronto roofing contractor? Steer clear of these five mistakes:

1. Last minute rush

One problem with being in a hurry is that you never have enough time to assess all choices at your disposal thoroughly. With roofing, this raises your chances of landing in the wrong hands.

All people out there claim to offer the top notch roof repairs, when in reality, only a portion of these ever live up to their expectations. To avoid being carried away by promises at the time you are most desperate, search for a suitable roofing contractor early before the need arises.

Take your time to go through profiles of different companies;make a favorites list; send enquiries if necessary. Keep only the firms that respond to your queries in the preference list.
toronto roofing contractor
2. Ignoring terms and conditions
The literatures in terms and conditions sections of contracts often seem overwhelming. As a result, very few people ever care to go through them.

You will however be doing yourself a disservice if you don’t take your time to read and understand terms and conditions of your roofing contractor before appending a signature. In fact, rogue firms hide unfavorable clauses inside these lengthy statements in order to give themselves a legal backing when they decide to fleece you.

The best contractors will strive to make their contract terms reader friendly. In case you need clarification, their staff will be ready to help. They will not pressurize you into sealing the deal until you are reading from the same page; you can sleep over it if you like.

3. Being too lenient
Ensure that the people coming over work on your roof are qualified. Do not let rookies work on your property if they are not accompanied by an experienced supervisor. This may sound selfish, but you cannot afford to be lenient with an investment as important as a home. A small mistake could cost you a lot in future.

4. Not asking for Warranty
Any company that is confident with the services it offers must be willing to provide warranty. Reputable firms have warranty periods ranging from two to five years on different fixtures. During this time, you rest assured that if the damage reoccurs, you won’t have to struggle digging into your own pockets.

5. Ignoring warnings from past clients
People who have received the services of a firm before can provide you with clues on its competence. Do not rush into a commitment before gauging the opinions of past clients.

Turn to friends or relatives who have had repairs before and ask them if they were impressed with the services that they received. Alternatively, go to consumer review websites and see what homeowners say about your preferred Toronto roofing contractor.

How electrical contractors in toronto Protect Your Home from Electrical Mishaps

No Comments

How electrical contractors in toronto Protect Your Home from Electrical Mishaps

Every home perhaps uses electricity as a source of power and people are advised that they examine safety measures when using electricity. The stories about burnt homes, damaged appliances, fatal shocks, or even deaths in homes can tell it all. You don’t want to be part of the statistics because you have a choice to make. You can consult with electrical contractors toronto to ensure you have electrical mishaps eliminated.

The first step if you want to maintain safety in use of electricity is to ensure that the appliances, electrical gadgets, and other items using electricity are wired properly. The circuit breaker you use may be outdated or not having the capacity to feed power to the new electrical appliances you added. An upgrade of the electrical system may be the starting point. If it is a new building, you want to make sure the wiring installation is properly done by a qualified electrical contractor. There are standards and codes to adhere to when doing electrical installations and you don’t want to flout them.

As you continue using electricity you will time in time encounter problems. You may begin to see lights flickering and circuit breakers going off often. You may also start smelling burnt plastic because the sockets are melting from overheating. If the wiring insulation heats up too much, it may also release the burning odor. You should contact an electrician to perform a thorough inspection to see if the electrical system is working properly.

Surges are common when the weather is stormy and although they can cause damage to appliances, you can prevent that by having surge protectors. If you are using heavily powered appliances such as dryers, refrigerators, space heaters, or power tools, they can create internal power surges. This happens because these equipment draw huge amounts of power when you switch them on or when they are running and it can be a problem to smaller gadgets that have microprocessor circuits or chips. A simple solution to help protect the electronic gadgets, appliances, wiring, and the home is to have surge protectors installed. They help safeguard your home from external surges and also prevent the surges occurring internally which may cause gradual damage to your appliances or devices.

electrical-contractors-toronto

Electrical contractors have the right knowledge to troubleshoot problems with your electricity. It may be the appliance or power tools you use. It could also be the wiring you have installed or the circuit breaker. Whichever problem you may be having, when you consult with a trained, licensed electrical contractor, you keep your home safe. The electrical contractor may also provide you with handy tips to ensure safe use of electricity and how to reduce the energy bills.

If you are occupying a new home, you may not know the state of its electrical wiring and an inspection by trusted electrical contractors toronto goes a long way to ensure safety. The outlets, circuit breakers, wiring, insulation, surge protectors, and other electrical components should be examined and tested for safety. This way, you ensure that you don’t experience damages to your appliances or risk your family suffering from electrical shocks. You should not assume or overlook any electrical problem you detect in your home, make sure you seek professional help.